---
title: "Fulfillment Settings"
description: "Choose whether orders go to distributors automatically, which supplier each product sells from, how products with a MAP are priced, how supplier cost changes affect prices, the hazmat fee on powder and primers, and how test orders are handled"
---

> Documentation Index
> Fetch the complete documentation index at: https://docs.firearmcart.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Fulfillment Settings

**Settings > Fulfillment** controls what happens after a customer pays: whether orders go to your distributors on their own, which supplier a product with several sells from, and how MAP and supplier cost changes set your prices. It also holds the [hazmat fee](#hazmat-fee) checkout adds to orders with powder or primers. Changes apply to future orders and supplier syncs; click **Save changes** to keep them.

Two related settings live on other pages:

- **Local pickup**, under **Settings > Checkout**. See [Local Pickup](/store-setup/checkout#local-pickup).
- **Your store FFL** and **Show my FFL at checkout**, under **Settings > General**. See [Store FFL](/store-setup/store-information#store-ffl).

---

## Automatic Fulfillment

The **Automatic fulfillment** switch sends completed orders to your distributors without you doing anything. It's off by default.

| Switch | What happens to a new order |
|--------|-----------------------------|
| **On** | Items from a distributor are sent to that distributor, and items from your own stock go to [ShipStation](/integrations/shipstation) if it's active |
| **Off** | The order waits on the Orders page until you process it. See [Fulfillment](/orders/fulfillment). |

With the switch on, each order goes to its distributors, such as Zanders or Chattanooga, as soon as the customer's payment goes through, with no approval step. Three kinds of item always wait for you, whatever the switch says:

- Local pickup orders, which are filled from your own shelf
- Items a customer adds after checkout with a post-purchase upsell
- Items from Davidson's, which you order on Davidson's website. See [Placing Davidson's Orders](/integrations/davidsons#placing-davidsons-orders).

Before an order goes out automatically, each distributor's items are checked against that distributor's stock, less the units other orders are already waiting on. When a distributor doesn't have enough of an item, its items on the order wait under **Needs Processing** with a note saying how many it has, and you get a **Not Enough Stock to Send** alert. The rest of the order goes out. Split the item across suppliers or choose another one, then process it. See [Processing Orders Manually](/orders/fulfillment#processing-orders-manually).

If a distributor still can't fill an order it was sent, the fulfillment shows **Error** with the reason and you get an alert, so you can sort it out and click **Reship**. Kinsey's and Orion Wholesale also check their own stock right before the order is sent. See [Kinsey's](/integrations/kinseys#items-kinseys-cant-fill) and [Orion Wholesale](/integrations/orion#items-orion-cant-fill).

---

## Supplier Selection

When a product has more than one supplier, such as your own stock and a distributor, **Supplier selection** picks the one the product sells from. That supplier, the product's selected supplier:

- Fills the product's orders
- Sets the cost your markup prices from. The MAP that counts is the highest any of the product's switched-on distributors reports, even when another supplier is selected
- Sets the stock customers can buy, on your storefront and in feeds and marketplaces such as gun.deals, Google Shopping and Guns.com

| Option | Which supplier is selected |
|--------|----------------------------|
| **Preferred supplier** | The supplier marked preferred on the product, while it has stock. Otherwise the supplier with the most stock. |
| **Lowest cost** | The in-stock supplier with the lowest cost per item. A supplier with no cost on file is never picked over one that has one. |
| **Highest stock** | The supplier with the most stock to sell |

A supplier with no stock, or a distributor you've switched off, is never selected. When the selected supplier sells out, the next one takes over straight away: the product's price, cost and stock move to it. For example, under **Lowest cost**, a distributor running a sale with 2 units left is selected, and the product sells exactly those 2 at a price based on the sale cost. Once they're ordered, the next supplier's stock and price take over.

New stores start on **Lowest cost**. A store that never saved this setting uses **Preferred supplier**. When you change it, your products' prices and stock are updated in the background within a few minutes. A product with only one supplier always uses it, and a variant with its own supplier settings keeps them. When you process an order yourself, you can still pick a different supplier for each item.

---

## Default Preferred Supplier

**Preferred source** sets which supplier is marked preferred when an imported product first gets more than one supplier: **Internal (own stock)** or one of your active distributors.

It's used only when that supplier is available for the product: a product only a distributor carries keeps its distributor. It never changes a preferred supplier you chose yourself.

---

## MAP Pricing

**MAP pricing** sets how a product with a MAP (minimum advertised price) is priced. Distributors send a MAP for products whose manufacturer sets one.

| Option | What happens |
|--------|--------------|
| **Never below MAP** (default) | Price at your markup over cost. A product your markup would put under its MAP sells at the MAP. |
| **Price at MAP** | Sell every product that has a MAP at exactly its MAP. Your markup prices products without one, and any whose cost is at or above their MAP. |

When you change it and click **Save changes**, your products' prices are updated in the background within a few minutes. From then on, imports, **Reprice** on the Products list, the **Markup** on the product page and distributor syncs all price this way.

- A price moves only where [Supplier Cost Changes](#supplier-cost-changes) and the product's **Auto-update price on cost change** switch allow it. **Only raise prices** never lowers a price, so a price above MAP stays there, and **Never change prices** leaves every price alone.
- Under **Price at MAP**, a price you type above MAP shows **Priced above MAP** on the product page, and syncs move it back to the MAP.
- Switching back to **Never below MAP** keeps the prices you have. Products priced at MAP follow their supplier's cost from there; use **Reprice** on the Products list to apply your markup again.

See [MAP Pricing](/products/creating-products#map-pricing) for how MAP shows on the product page.

---

## Supplier Cost Changes

What a distributor sync does to a product's price when the supplier's cost changes:

| Option | What happens |
|--------|--------------|
| **Follow my markup** (default) | Recalculate the price from your markup whenever a supplier cost changes, up or down |
| **Only raise prices** | Recalculate only when the new cost would raise the price. When a supplier lowers their cost, your price stays where it is and the difference is extra margin. The price moves again once the cost climbs past the level it was last priced at. |
| **Never change prices** | Leave prices alone. Cost, stock and compare-at prices still refresh from the supplier. |

This applies only to products with automatic price updates turned on, which is the default for imported products. A price you type on the product page sets the product's **Markup** to match, so syncs follow the cost from there at that markup. To keep a price where it is, turn off **Auto-update price on cost change** on that product. A price under the cost, or at twice the cost or more, doesn't follow a markup and is left alone under every option, unless it's below the distributor's MAP: **Follow my markup** and **Only raise prices** reprice it from your markup, never below MAP. A price a sync sets never goes below MAP, and a higher MAP raises it under those two options; under **Never change prices** MAP isn't applied for you. See [MAP Pricing](/products/creating-products#map-pricing). If you switch back to **Follow my markup**, prices that were held are recalculated on the next sync.

For a product with several suppliers, the cost that counts is the selected supplier's, the one [Supplier selection](#supplier-selection) picks. When your own stock is the selected supplier, **Follow my markup** only ever raises the price. See [Pricing and Stock With Several Suppliers](/products/inventory#pricing-and-stock-with-several-suppliers).

---

## Hazmat Fee

Powder, primers and percussion caps are hazardous materials. Carriers charge a hazmat surcharge on every package of them, about $57–$63 a package on UPS and FedEx Ground in 2026, and distributors that drop-ship them add a hazmat charge of their own. The **Hazmat fee** passes that cost on to the customer. It's off by default.

1. Go to **Settings > Fulfillment**
2. Under **Hazmat fee**, turn on **Charge a hazmat fee**
3. Enter the **Fee per order**, from $0.01 to $999.99
4. Click **Save changes**

How it's charged:

- **Once per order.** Checkout adds it when the cart has at least one hazmat item, however many it has, as a **Hazmat fee** line in the order summary next to shipping.
- **Free shipping doesn't waive it.** A free-shipping code or a free shipping rate still charges the fee, as most retailers do.
- **Local pickup orders don't pay it.** Nothing ships.
- **Taxed like shipping.** Wherever your shipping is taxed, so is the fee. See [Taxes](/store-setup/taxes).
- **Shown on the order.** The fee appears on the order page, the customer's order confirmation and order page, emails and invoices, and in the API as `hazmat_fee`.

Retailers typically charge $19–$30. Which products count as hazmat, and how they ship, is covered in [Powder and Primers (Hazmat)](/store-setup/shipping#powder-and-primers-hazmat).

---

## Testing

**Send test orders to fulfillment** lets orders paid with a test card reach your distributors. It's off by default.

While it's off, a test order isn't sent to distributors or ShipStation and doesn't send the **New order placed** alert. Your own stock is still reduced, so adjust it afterwards if you test with real products. Once a customer has placed a test order, FirearmCart treats that customer's later orders as test orders too.

Turn it on only while you test your fulfillment setup, and off again afterwards: test orders then reduce stock and notify your team like real ones.

---

## Related Documentation

- [Fulfillment](/orders/fulfillment) - Processing orders and suppliers
- [Inventory](/products/inventory) - Stock and multiple suppliers
- [Checkout Settings](/store-setup/checkout) - Including local pickup
- [Store Information](/store-setup/store-information) - Including your store FFL

Source: https://docs.firearmcart.com/store-setup/fulfillment/index.mdx
